Back to Journal
September quarter CPI preview: what a hold or a rise would needPhoto: SiteLogic editorial image

Interest Rates

September quarter CPI preview: what a hold or a rise would need

The ABS publishes September 2026 inflation on 28 October, days before the RBA's 3 November decision. This preview sets out the base-effect arithmetic and what each outcome would mean for a feasibility.

·Written and fact-checked . Published .·5 min read

Two dates sit close together. The ABS releases the September 2026 Consumer Price Index on Wednesday 28 October. The RBA's Monetary Policy Board meets on 2 and 3 November and announces its decision on Tuesday 3 November.

This article was written on 3 October, so it contains no result. It sets out what the number is compared against, how to read it, and what to do with the answer. Check the actual figures at the ABS before you rely on any of this.

What is scheduled

The ABS release calendar lists the September 2026 CPI for 28 October at 11:30am AEDT. The calendar warns that release dates may change. The ABS CPI release page says quarterly CPI data are added to its tables when the monthly CPI for March, June, September and December is published. So the 28 October release carries the September quarter as well as the September month.

The RBA's board meeting schedule shows the meeting dates. The CPI is the last major inflation reading before the decision.

Where inflation stands before the release

The latest published reading is August 2026, released on 30 September. The ABS reports that the CPI rose 4.0% over the 12 months to August, up from 3.5% to July. Trimmed mean inflation, the ABS's underlying measure, was 3.6%, unchanged from July.

The RBA's target is inflation between 2 and 3 per cent. Both measures sit above that band.

In its 29 September statement the Board said inflation remains elevated, that some upside risks flagged in August were materialising, and that higher fuel prices had partly passed through to other prices. It raised the cash rate to 4.60% and said it would keep doing what it considers necessary to bring inflation back to target, including raising the rate further if needed.

The base-effect arithmetic

The annual rate for September depends on two things: the August annual rate and what the monthly change in September is compared with a year earlier. The ABS monthly series shows a 0.5% rise in September 2025 in original terms. That is the number the September 2026 original monthly change has to match to leave the annual rate unchanged. Do not use the seasonally adjusted monthly figure in this sum.

A rough formula, using the published annual rate of 4.0% to August: annual rate to September ≈ 1.040 × (1 + September 2026 monthly change) ÷ 1.005 minus 1.

Applying it:

  • A monthly change of 0.0% gives 1.040 ÷ 1.005 minus 1 = 3.5%.
  • A monthly change of 0.3% gives about 3.8%.
  • A monthly change of 0.5% gives about 4.0%.
  • A monthly change of 0.8% gives about 4.3%.

The ABS rounds its figures, so treat any result within 0.1 point of these as the same. The point is the mechanism. A 0.5% month leaves the annual rate where it is. Each extra 0.1 point in the month lifts the annual rate by about 0.1.

What would a hold or a rise need

No single release triggers a decision. The Board considers the whole outlook, and its statement says it will be attentive to the data. What you can do is describe how each outcome compares with the Board's stated concern.

If the annual CPI stays near 4.0% and trimmed mean stays at or above 3.6%, nothing in the data points toward inflation returning to the 2 to 3% band. That leaves open the possibility the Board itself raised on 29 September: a further increase if needed.

If the monthly change is low and trimmed mean eases, the data would show inflation moving the right way. Whether that is enough for a hold is the Board's judgement. The Board has said growth in aggregate demand needs to remain subdued for a period to reduce capacity pressures. On that wording, one soft month may not settle the matter.

If the monthly change is high and trimmed mean rises, the 29 September concern about inflation becoming embedded would carry more force.

None of this is a forecast. The same Board also looks at the labour market, the housing market and its own staff forecasts, and a new Statement on Monetary Policy is expected around the November decision. Check the RBA's release schedule for the date.

What it costs a project

Use an illustrative project: a $6.0m construction facility averaging 55% drawn over 18 months. These figures are illustrative. They demonstrate the method and will vary by project, lender and timing.

A 25 basis point move in the lending rate changes interest by $6,000,000 × 55% × 0.25% × 1.5 = $12,375 over the programme. A 50 basis point move changes it by $24,750.

For an owner-occupier with a $700,000 loan over 30 years at an illustrative 6.20%, the repayment is about $4,287 a month. At 6.45% it is about $4,401. That is $114 a month for 25 basis points.

Small numbers on one project. They matter because feasibilities that fail are rarely undone by a single move. They fail when finance cost, build cost and sale prices all move against the margin in the same quarter.

What to do before 28 October

Run your feasibility at the current holding rate and at 25 basis points above it. Write down in advance what margin you would accept at each.

Then read the ABS release itself, not a summary of it. Note the annual CPI, the monthly change and trimmed mean, and compare them with the arithmetic above.

Finally, leave the decision to the Board. The cash rate target is set on 3 November, and any change takes effect the following day.

This article is general information and not financial advice.

Published by the SiteLogic Editorial desk. Every fact traces to a primary source. See our standards and corrections register.

Fact-checked: 3 October 2026 · Review by: 3 January 2027

Sources: abs.gov.au · abs.gov.au · rba.gov.au · rba.gov.au · rba.gov.au

Our standards·

Share this article

Get new articles by email

Weekly digest of new articles. No spam. Unsubscribe any time.

Was this useful? Try the tool this post is based on:

Pro on SiteLogic. Logi: up to 60 messages a day. Logi also stops at US$15 of model cost in a Melbourne calendar month. The Developer Comms Kit and unlimited saved projects. The Strategy Lab simulator runs without Pro. Saving a scenario needs a signed-in account. $60/month or $600/year, ex GST. First 3 months are $30/month, ex GST, on monthly Pro.

See Pro pricingFree tier stays free.