Back to Journal
Ministerial call-in powers: section 20 and when they applyPhoto: SiteLogic editorial image

Planning Law

Ministerial call-in powers: section 20 and when they apply

Section 20 of the Planning and Environment Act lets the Minister for Planning exempt an amendment from the standard notice and exhibition requirements, removing the public submission and panel stage of the council-led process. When that pathway is used, and what it changes.

·Written and fact-checked . Published .·6 min read

Some large or contentious Victorian rezonings never reach a council planning committee at all. Section 20 of the Planning and Environment Act 1987 lets the Minister for Planning exempt an amendment from the standard notice and exhibition requirements in sections 17 to 19: the lever that removes the public submission and independent panel stage of the standard council-led process. The Minister prepares such amendments as a planning authority under sections 8 and 8A and approves them under section 35. For a developer relying on a planning scheme amendment to make a site work, understanding when that can happen, and what it changes, matters as much as understanding the zoning itself.

The provision

Under the ordinary planning scheme amendment process, a council prepares an amendment, exhibits it, considers submissions, and refers unresolved objections to an independent panel before a decision is made. Section 20 of the Planning and Environment Act 1987 sits outside that sequence: it lets the Minister exempt an amendment from the standard notice and exhibition requirements in sections 17 to 19 where the public interest justifies it. The power to prepare the amendment comes from the Minister being a planning authority under sections 8 and 8A, and the power to approve it sits in section 35; the section 20 exemption is what removes the public submission and panel stage that a council-led amendment would normally require.

This is sometimes described informally as a call-in power, because its practical effect is to move the decision away from the local council and the standard public process and into the Minister's hands. The Planning Victoria guidance describes the broader amendment framework these powers sit within.

What applies

The power is not limited to a single type of project. It has been used for site-specific rezonings, for precinct-scale structure plans, and for policy-driven amendments the state wants to progress on its own timetable rather than leave to individual councils. What the power changes is the pathway, not the underlying test. An amendment made this way still has to be a planning scheme amendment that fits within the broader scheme and state planning policy. It is the process for getting there that differs.

Because the Minister can exempt an amendment from standard notice and exhibition steps, the usual opportunity for directly affected landowners and the community to make a submission, and to have an unresolved objection tested by an independent panel, may not be available in the same way. That is the central practical consequence for anyone relying on this pathway, or anyone concerned about a site their land sits near.

How to model it

A rezoning or amendment that might proceed through this pathway should not be modelled with the same timing assumptions as a standard council-led amendment. The upside is that a ministerial pathway can move faster than an amendment competing for attention inside a council's ordinary program, particularly where the state has an independent policy interest in the outcome.

Timing estimates for a ministerial pathway should come from current, direct advice rather than from a previous project's experience. The department's priorities and capacity to progress amendments through this pathway change over time, and an estimate anchored to an earlier, unrelated amendment can be materially wrong for a new one.

The downside is that this pathway is not something a developer can simply request as an alternative to the standard process. It depends on the Minister deciding to exercise the power, generally where there is a clear state significance or public interest reason to do so. A feasibility that assumes ministerial intervention as the primary route to a rezoning is assuming access to a decision that is not in the applicant's control, and that assumption should be flagged and tested rather than built in as a base case.

Where a site is already the subject of a ministerial amendment process, the more useful modelling question is what the removal of standard notice and panel review does to the risk of a later legal challenge, rather than what it does to the headline timeline. A faster process is only an advantage if the resulting scheme amendment holds up, and a feasibility that treats the ministerial decision as final on the day it is made, without allowing for that residual risk, is understating the true position.

Interaction with other controls

These powers operate alongside, not instead of, the substantive planning scheme framework. A ministerial amendment still needs to sit consistently with state planning policy, with any relevant precinct structure plan, and with the zone and overlay framework that already applies to surrounding land. Where an amendment interacts with other state-led processes, such as a growth area precinct structure plan or another Minister-led program, the sequencing between those processes should be confirmed directly with the department rather than assumed from the amendment's public notice alone, since that notice may be limited or absent under this pathway.

Record keeping and monitoring

Because notice of an amendment made this way can be limited or absent, a developer relying on the outcome, or concerned about a neighbouring site, should not assume the standard notification channels will surface it. An amendment progressed with a section 20 exemption is still recorded against the planning scheme itself once it takes effect, and the amendment documentation should be sought directly from the department rather than inferred from what was publicly exhibited.

For a site that depends on a pending or possible ministerial amendment, keep a direct record of correspondence with the department about the amendment's status, rather than relying on informal updates or secondhand accounts. Where the amendment affects land beyond the immediate site, such as a shared precinct or an adjoining parcel, confirm precisely how the amendment documentation defines the affected area, since a boundary drawn broadly or narrowly can materially change which sites benefit from the change and which do not.

What to check before exchange

Before pricing a site on the assumption that a ministerial amendment will resolve a zoning constraint, confirm with the department whether that pathway is genuinely being considered for the site, rather than treating it as a generic option available to any applicant. Check whether any notice or exhibition step has already occurred, or has been exempted, since that affects what rights neighbouring landowners or objectors may still have.

Where the site itself might attract this kind of intervention because of its scale or state significance, get that confirmed rather than assumed, and build the acquisition timeline around the department's own program rather than a standard council amendment timetable. Where the site instead depends on the standard council-led amendment process, do not price in the ministerial pathway as a fallback. It is available to the state, not to the applicant, and a feasibility should reflect that distinction plainly.


Published by the SiteLogic Editorial desk. Every fact traces to a primary source. See our standards and corrections register.

Fact-checked: 19 July 2026 · Review by: 19 July 2027

Sources: legislation.vic.gov.au · planning.vic.gov.au

Our standards·

Share this article

Get new articles by email

Weekly digest of new articles. No spam. Unsubscribe any time.

Was this useful? Try the tool this post is based on:

Pro on SiteLogic. Logi: up to 60 messages a day. Logi also stops at US$15 of model cost in a Melbourne calendar month. The Developer Comms Kit and unlimited saved projects. The Strategy Lab simulator runs without Pro. Saving a scenario needs a signed-in account. $60/month or $600/year, ex GST. First 3 months are $30/month, ex GST, on monthly Pro.

See Pro pricingFree tier stays free.